皮皮学,免费搜题
登录
搜题
【单选题】
London’s First Light Rail System The Docklands Light Railway (DLR) took just three years to build at a cost of £77 million. It is London’s first Light Rail System, but its route follows that of a number of older lines, which carried the nineteenth century railways through the crowed districts of the East End. The section of the line from the Tower Gateway Station to Poplar follows the line of one of London’s earliest railways, the London & Blackwell (1840), a cable-drawn railway (later converted to steam) which carried passengers to steam ships at Blackwell Pier, and provided transport for the messengers and clerks who went backwards and forwards between the docks (码头) and the city every day. From Poplar to Island Gardens, a new line crosses high above the dock waters, and then joins the old track of the Millwall Extension Railway, built to service the Millwall Docks (1868) and to provide transport for workers in the local factories. This line was horse-drawn for part of its route, until the 1880s. The Polar to Stratford section of the DLR route was first developed by the North London Railway, built in the 1850s to link the West and East India Docks with the manufacturing districts of the Midlands and North of England. There were major railway works and sidings (岔线)at Bow until recently. The trains are automatically controlled from a central computer, which deals with all signaling and other safety factors, as well as adjusting speeds to keep within the timetable; on board each vehicle, Train Captains, who are also fully qualified drivers, are equipped with two-way radios to maintain contact with central control. There are passenger lifts, and self-service ticket machines, at every station. 第11题:The passage tells us that London’s first Light Rail System.
A.
was constructed in the nineteenth century.
B.
will be finished in three years’ time.
C.
follows some of the original lines.
D.
took three years longer than expected to complete.
拍照语音搜题,微信中搜索"皮皮学"使用
参考答案:
参考解析:
知识点:
.
..
皮皮学刷刷变学霸
举一反三
【简答题】昆虫的成虫体躯分为()三体段,各段由若干()组成,并具有不同的附器。
【判断题】熔体流动速率的测试过程中,熔体流速逐渐增大,表现出挤出速率与料筒中熔体高度有关,这可能是由于熔体与料筒有粘附力有关,这种力量阻碍活塞杆下移。为避免容量效应,应在同一高度截取样条。
A.
正确
B.
错误
【多选题】制作酸奶风味异常,可能的原因有:
A.
原料乳中含有抗生素
B.
发酵剂活力不够
C.
污染
D.
原料乳中蛋白质含量高
【简答题】一种熔体在1300°C的粘度是310 Pa·s,在800°C是10 7 Pa·s,在1050°C时其粘度为多少?在此温度下急冷能否形成玻璃?
【单选题】茶树喜酸忌(  ),高浓度的该元素对茶树生长有抑制作用。
A.
B.
C.
D.
【单选题】下列说法正确的是( )
A.
在熔体中引入高价金属氧化物也能使熔体的粘度增高。
B.
C.
D.
同时引入一种以上的碱,粘度比等量的一种碱高。
【简答题】昆虫的成虫体躯分为()三体段,个体段由若干()组成,并具有不同的附器。
【简答题】根据预习要求,写好二氧化碳分子量的测定(预习报告)。并拍照上传 注意格式、内容 特别是理解之后,简单地用自己的语言表达
【单选题】茶树喜酸忌 ,该元素高浓度对茶树的生长有抑制作用。
A.
B.
C.
D.
【单选题】高聚物流体是一种兼有粘性和弹性的液体 . 特别是当分子量大 , 外力作用时间短或速度很快 , 温度在熔点以上不多时 , 弹性效应显著。下面哪种效应不属于高聚物流体的弹性效应 ( ) 。
A.
挤出胀大效应
B.
爬杆效应
C.
不稳定流动现象
D.
高黏度
相关题目: