皮皮学,免费搜题
登录
搜题
【简答题】
Read through the following arguments and identify the author’s position. Fill in the blanks with the number of sentence. Argument 1: 1.The nature and origin of disease was unclear until relatively recently. 2. At the end of the nineteenth century, Koch, a Prussian scientist, introduced a set of procedures( 程序 ) now known as Koch’s postulates( 假定 ) . 3. He experimented with bacterial colonies( 细菌群落 ) cultivated in the laboratory, made from the blood of dying cattle. 4. When these cultures were injected into healthy live cattle, these also caught the same disease. 5. At the time, these findings were astonishing. 6. Koch had been able to provide proof to support the theory that disease was spread by germs. 7. He contributed one of the most important methodological advances in the history of medicine. 1. The position : ___________
拍照语音搜题,微信中搜索"皮皮学"使用
参考答案:
参考解析:
知识点:
.
..
皮皮学刷刷变学霸
举一反三
【单选题】采用相位法测距的电磁波测距仪,其测距精度最高。某测距仪的标称精度为±(3+3ppm)mm,用该仪器测得500m距离,如不顾及其它因素影响,则产生的测距中误差为( )mm。
A.
±4.5
B.
±8
C.
±6
D.
±63
【判断题】一般文件的命名不能超过255个汉字字符。
A.
正确
B.
错误
【判断题】使用wireshark对抓获的包进行显示过滤时,如果只要显示源IP或者目的IP地址为192.168.1.1的数据包,则过滤规则为:ip.addr ==192.168.1.1。
A.
正确
B.
错误
【单选题】IP地址为192.168.1.1的MAC地址是什么?
A.
0A-10
B.
00-10
C.
00-20
D.
0B-31
【多选题】网络管理员审核路由器上的路由表,并查看下一跳 IP 地址为 192.168.1.1 的目标网络 172.16.64.0/18 路由。哪两项描述适用于该路由?
A.
默认路由
B.
超网路由
C.
最终路由
D.
二级子路由
【单选题】采用相位法测距的电磁波测距仪,其测距精度最高。某测距仪的标称精度为± (3 十 3ppm) mm ,用该仪器测得 500m 距离,如不顾及其它因素影响,则产生的测距中误差为 ( )mm 。
A.
± 18
B.
± 3
C.
± 4 . 5
D.
± 6
【简答题】问题5 若在IP地址为192.168.1.1的计算机上不连接双绞线,则在“命令提示符”环境中输入“ping 127.0.0.1”,运行结果为( )(正常/不可达)。在“命令提示符”环境中输入“ping 192.168.1.1”,运行结果为( )(正常/不可达)。在“命令提示符”环境中输入“ping 192.168.1.2”,运行结果为( )(正常/不可达)。
【单选题】MAC地址为00-D0-F8-00-AB-CD,IP地址为192.168.1.1的主机,运行ISATAP遂道技术,根据EUI-64规范,生成的IPv6接口地址为()。
A.
3EDE://192.168.1.1
B.
5EFE://192.168.1.1
C.
5EFF://192.168.1.1
D.
3FFE://192.168.1.1
【多选题】在使用默认IP地址为192.168.1.1的路由器进行Internet接入时,想要联网的计算机IP地址可以设置为( )。
A.
192.168.1.1
B.
192.168.1.56
C.
192.168.1.225
D.
192.168.1.266
【多选题】网络管理员审核路由器上的路由表,并查看下一跳 IP 地址为 192.168.1.1 的目标网络 172.16.64.0/18 路由。哪两项描述适用于该路由?(选择两项。)
A.
默认路由
B.
超网路由
C.
最终路由
D.
父路由
E.
二级子路由
相关题目: