皮皮学,免费搜题
登录
搜题
【简答题】
TOKYO, JAPAN--What do you do when you see a cockroach (蟑螂)? Do you hit it with a newspaper? Do you step on it? When researchers at Tokyo University see a cockroach, they take the remote control and make the cockroach turn around, run left or right, or go forward. These scientists are changing the cockroaches into robots. Each cockroach has a very small pack that has in it a microprocessor(微处理器).Then researchers can send signals from the remote control to the pack. The signals control the movements of the cockroaches. Why does anyone want to control a cockroach? “Insects can do many things that people can’t,” says Isao Shimoyama, head of robot research at Tokyo University. In a few years, he says, these robot insects will carry very small cameras. They will be able to move through earthquake rubble(瓦砾)to look for people or move under doors to find information about someone. This may seem strange, but the Japanese government thinks the research is very important. The government is giving the scientists $ 5 million for this research. First, the researchers breed (培育)hundreds of cockroaches. They use only the American cockroach because it is bigger and stronger than other cockroaches. Then they choose the best cockroaches and remove their wings and antennae(触须). They put small packs where the antennae were. The packs weigh about three grams, or about two times the weight of the cockroaches themselves. “Cockroaches are very strong,” says Ralph Holzer, who is a researcher at Tokyo University. “They can lift 20 times their own weight. ” With a remote control, the scientists send signals to the packs. When a cockroach gets the signal, it moves. The problem is that the cockroaches don’t always move in the right direction. 小题1:The scientists are changing the cockroaches into robots because ______. A.they want cockroaches to do things people can’t in the future B.they want to control the movements of the cockroaches C.they want cockroaches to take photos of the earthquakes D.they want to send signals to the packs on the cockroaches 小题2:What can cockroaches do to help people? A.They can lift 20 times their own weight. B.They can help people to carry very small cameras. C.They can breed hundreds of cockroaches. D.They can search for those people in rubble after an earthquake. 小题3:Scientists control cockroaches’ movements ______. A.by removing their wings B.by sending signals from the remote control C.by using very small cameras D.by removing their antennae 小题4:What problem do the rcscarchcrs meet with? A.The cockroachcs sometimes clon;t move. B.The cockroachcs sometimes move in ihc wrong direction. C.The cockroachcs arc too big to move through earthquake rubble. D.The cockroachcs can only lift 20 times their own weight.
拍照语音搜题,微信中搜索"皮皮学"使用
参考答案:
参考解析:
知识点:
.
..
皮皮学刷刷变学霸
举一反三
【单选题】以下哪一种关于消费者最优化过程结果的说法是不正确的 ?
A.
消费者在受预算约束线限制时达到其最高的无差异曲线
B.
物品之间的边际替代率等于物品之间价格的比率
C.
在消费者预算约束线的任意两点之间,他是无差别的
D.
消费者的无差异曲线与其预算约束线相切
【多选题】下列关于边际替代率说法正确的有( )。
A.
通常商品的边际替代率逐渐递减,其无差异曲线凸向原点
B.
边际替代率可能为无穷大,无差异曲线是一条垂直的直线
C.
边际替代率为常数,无差异曲线是一条向右下方倾斜的直线
D.
边际替代率不可能为零
【单选题】当静脉穿刺时,病人感到局部疼痛并伴有肿胀,试抽回血,下一步处理是
A.
勿拔出,嘱病人握拳再穿刺
B.
试推药物,观察局部反应
C.
松开止血带后,休息片刻再重新穿刺
D.
拔出针头,更换部位,重新穿刺
E.
将针头稍退少许,再穿刺
【单选题】关于无差异曲线,不正确的是( )。
A.
无差异曲线是由两种商品不同数量的组合组成B.无差异曲线不可能为直线
B.
无差异曲线是序数效用论的重要分析工具
C.
无差异曲线上的每一点所代表的两种物品不同数量的组合提供的总效用是相等的
【多选题】根据《城市房地产抵押管理办法》的规定,下列房地产不得设定抵押的是( )。
A.
权属有争议的房地产
B.
用于教育的房地产
C.
用于市政的房地产
D.
已依法公告列入拆迁范围的房地产
E.
个人所拥有的房地产
【单选题】当静脉穿刺时,病人感到局部疼痛并伴有肿胀,试抽有回血,下一步处理是:
A.
勿拔出,嘱病人握拳再穿刺
B.
试推药物,观察局部反应
C.
松开止血带后,休息片刻再重新穿刺
D.
拔出针头,更换部位,重新穿刺
E.
将针头稍退少许,再穿刺
【简答题】在三相异步电动机的正反转控制电路中,正转接触器 KM1 和反转接触器 KM2 之间的互锁作用是由 KM1 的线圈与 KM2 的动断辅助触点 ___________ , KM2 的线圈与 KM1 的动断辅助触点串联连接方法实现的。
【单选题】在 三 相 异 步 电 动 机 的 正 反 转 控 制 电 路 中,正 转 接 触 器 KM1和 反 转 接 触 器 KM2之 间 的 互 锁 作 用 是 由 ( ) 连 接 方 法 实 现 的。(a) KM1 的 线 圈 与KM2的 动 断 辅 助 触 点 串 联,KM2的 线 圈 与 KM1 的 动 断 辅 助 触 点 串 联 (b) KM1 的线圈与KM2的动合触点串联,KM2的 线 圈 与...
A.
a
B.
b
C.
c
D.
d
【单选题】法律、法规规定不得抵押的房地产,不能作为抵押目的来估价,或者说这类房地产没有抵押价值。设定房地产租赁权的土地使用权是以划拨方式取得的,依法拍卖该房地产后,应当从拍卖所得的价款中缴纳相当于应缴纳的土地使用权出让金的款额后,抵押权人方可优先受偿。( )
A.
正确
B.
错误
【单选题】在三相异步电动机的正反转控制电路中,正转接触器 KM1 和反转接触器 KM2 之间的互锁作用是由( )联接方法实现的。
A.
KM1 的线圈与 KM2 的常闭辅助触点串联, KM2 的线圈与 KM1 的常闭辅助触点串联
B.
KM1 的线圈与 KM2 的常开触点串联, KM2 的线圈与 KM1 的常开触点串联
C.
KM1 的线圈与 KM2 的常闭触点串联, KM2 的线圈与 KM1 的常闭触点串联
D.
不确定
相关题目: