皮皮学,免费搜题
登录
搜题
【简答题】
The future population will be older than today, and this in turn will change the pattern s of social demands. However, Mexico will still be far from the "aging societies" that will most likely prevail ( 占优势 ) in the industrialized countries. In less than 25 years, the country will have to add almost as much infrastructure as it has already built up to now, simply to maintain services and production at the current levels. This will be a tremendous challenge, although a similar one was faced successfully in the recent past, when available infrastructure was doubled in two decades or so. It is no wonder that much has been said about the need to reduce or preferably halt Mexico's population control which is taken for granted as both good and necessary. It has also gained supporters in the developing world, and Mexico is no exception. But the arguments about population are complicated , as the following discussion illustrate s. Even if Mexico's population reaches 125 million by the year 2010, its population density is still smaller than the 1985 population density of some 50 countries. By international standards Mexico will still not be overpopulated by the year 2010. If wealth is generated by people, the more individuals there are, the greater the wealth that potentially could be generated. Why should Mexico control its population at density levels below those of the richer countries if more population represents the possibility of generating more wealth? On the other hand, it is often pointed out that once sustainability( 支撑力) limits are near or are reached, there are decreasing productivity gains (or,perhaps more accurately, increasing productive losses) , and people become a cost rather than an asset. If we assume that there are sustainability limits and that we are close to reaching these limits at a world level, then it is appropriate to check population growth.
拍照语音搜题,微信中搜索"皮皮学"使用
参考答案:
参考解析:
知识点:
.
..
皮皮学刷刷变学霸
举一反三
【单选题】追求是一个持之以恒的过程,只要心中存在着这种信念,日复一日,年复一年,你一定会到达幸福的彼岸。但其中必定会有狂风暴雨,冰山触礁,它们就像逆流一样阻止你前进的步伐。这时,你不要望而却步,不要灰心 丧气 ,哪怕最终只在幸福之门外徘徊。毕竟,我们追求过,努力过,与狂风暴雨拼搏过。追求就是一种幸福,正如泰戈尔所说过的一句话:“天空中没有留下鸟的痕迹,但我已飞过。” 与 “日复一日,年复一年”意思最接近的成...
A.
周而复始
B.
永不言败
C.
勇往直前
D.
再接再厉
【多选题】端面铣刀铣削平面,如果采用对称铣削,其特点是( )。
A.
每个刀片将在顺铣和逆铣之间交替变化
B.
整个切削过程振动较小
C.
刀具中心线与工件中心线重合
D.
适合加工狭长或较薄的工件
E.
一般用在加工宽度与刀盘直径接近的平面
【单选题】翡翠交易中,“对桩”的准确含义是指
A.
看货者喜欢的货
B.
看货者要找的货
C.
看货者认为物有所值的货
D.
看货者随便看看的货
【判断题】端面铣削过程中不对称逆铣的铣削特点是刀齿以较小的切削厚度切入,又以较大的切削厚度切出。( )
A.
正确
B.
错误
【单选题】下面不是圆柱铣刀铣削时的特点的是
A.
切削过程较平稳;
B.
在卧式铣床上使用;
C.
主要加工宽度小于铣刀长度的狭长平面;
D.
能在立式铣床上使用。
【多选题】端面铣刀铣削平面,如果采用对称铣削,其特点是( )。
A.
每个刀片将在顺铣和逆铣之间交替变化
B.
整个切削过程振动较小
C.
适合加工狭长或较薄的工件
D.
一般用在加工宽度与刀盘直径相近的平面
【多选题】铣削加工的特点是
A.
生产效率高
B.
尺寸精度高
C.
容易产生振动
D.
刀齿散热条件较好
【简答题】平行铣削的特点是什么?有什么缺点?用什么方式解决?
【单选题】追求是一个持之以恒的过程,只要心中存在着这种信念,日复一日,年复一年,你一定会到达幸福的彼岸。但其中必定会有狂风暴雨,冰山触礁,它们就像逆流一样阻止你前进的步伐。这时,你不要望而却步,不要灰心 丧气 ,哪怕最终只在幸福之门外徘徊。毕竟,我们追求过,努力过,与狂风暴雨拼搏过。追求就是一种幸福,正如泰戈尔所说过的一句话:“天空中没有留下鸟的痕迹,但我已飞过。” “持之以恒”出自( )
A.
朱柏庐《朱子家训》
B.
曾国藩《家训喻纪泽》
C.
《鸿门宴》
D.
《晏子使楚》
【判断题】轮廓铣削的特点是刀具路径在同一高度内完成一层切削,遇到曲面时将其绕过,下降一个高度进行下一层的切削。
A.
正确
B.
错误
相关题目: