图3-33~图3-36为济南市区某住宅机械循环热水采暖系统。请在认真识读该工程项目图纸的前提下,计算该项目的工程量,编制其分部分项工程量清单。 工程基本概况如下。 (1)本工程管材为焊接钢管,DN≥32为焊接连接,其余为丝接。 (2)除图上注明者外,L2立DN25,其余立管及接散热器支DN20。 所有接散热器立管的顶端和末端安装丝扣铜球阀各一个,规格同。L2、L5、L6立散热器供、回水支安装丝扣铜球阀一个,规格同。 (3)双侧连接散热器,两散热器中心距为3.3m。单侧连接散热器,立管中心距散热器中心1.6m。 (4)散热器选用TZY2-6-8铸铁柱翼型散热器(其主要技术参数见表4-3),采用成组落地安装。每组散热器均安装010手动放风阀一个。 (5)所有地上明装管道人工除微锈后,刷红丹防锈漆二遍,再刷银粉漆二遍。散热器现场刷银粉漆。 (6)所有地沟内管道均保温,采用岩棉瓦块8=40mm,外缠玻璃丝布一层,玻璃丝布面不刷油漆。 (7)管道穿墙、楼板及地面加一般钢套管。管道穿楼板、穿墙孔洞及管道安装完毕后的由土建考虑完成,此项目暂不计算 (8)管道支架:供回水干管设置由角钢L40×4制作,每个单件平均质量1.08kg,共19个,支架人工除微锈后刷红丹防锈漆二遍,再刷银粉漆二遍;立支管采用成品管卡。 (9)干管坡度i=0.003(本工程暂不考虑坡度)。 (10)未尽事宜,执行现行施工及验收规范的有关规定。