皮皮学,免费搜题
登录
搜题
【单选题】
Often enough the craft worker's place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement. At Corinth and Athens, however, two of the best-known potters' quarters were situated on the cities' (5) outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other giazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather (10) than animal images, was adopted between 630 and 530 B.C. its distinctive color and luster were the result of the skillful adjustments of the kiln's temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear the functions of making and decorating were usually divided between them, but neither group can have been so specialized the they (15) did not share in the concerns of the other. The broad utility of terra-cotta was such that workers in clay could generally afford to Confine themselves to either decorated ware and housewares like cooking pots and storage Jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine (20) ware, but a rural pottery establishment on the island of Thasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted (25) pots produced in quantity by easy, inexpensive means-as numerous featureless statuettes and unattractive cases testify. The passage mainly discusses ancient Greek pottery and its
A.
production techniques
B.
similarity to other crafts
C.
unusual materials
D.
resemblance to earlier pottery
拍照语音搜题,微信中搜索"皮皮学"使用
参考答案:
参考解析:
知识点:
.
..
皮皮学刷刷变学霸
举一反三
【单选题】在配位反应 M + Y = MY中,哪个副反应有利于主反应的进行( )
A.
M的水解反应
B.
M与其它离子的配位反应
C.
Y的酸效应
D.
Y与其他金属离子的配位反应
E.
MY的混合配位效应
【单选题】一般只适用于厂外运输。
A.
铁路运输
B.
水上运输
C.
汽车运输
D.
带式输送机运输
【单选题】低温烘烤干燥方式通常在{.XZ}中使用。
A.
汽车维修涂装
B.
汽车磷化涂装
C.
汽车电泳涂装
D.
汽车粉末涂料涂装
【多选题】小型箱式汽车多用于运输( )。
A.
贵重货物
B.
邮件包裹
C.
商品配送
D.
工厂配送
E.
大件货物
【单选题】汽车配件的运输方式中适用于运距长,时间紧迫的急需配件的运输是
A.
铁路运输
B.
汽车运输
C.
水路运输
D.
航空运输
【简答题】罐式汽车用于运输()
【多选题】对于主反应 Y+M=MY , Y 的副反应系数越大,则
A.
Y 副反应程度越大
B.
主反应程度越大
C.
M 的副反应程度越大
D.
主反应程度越小
【单选题】某溶液中含有 KCl 、 KBr 和 K 2 CrO 4 其浓度均为 0.010 mol·dm -3 , 向该溶液中逐滴加入 0.010 mol·dm -3 的 AgNO 3 溶液时 , 最先 沉淀 和最后沉淀的是( ) ( 已知 : K sp (AgCl) = 1.56 ́ 10 -10 , K sp (AgBr) = 7.7 ́ 10 13 , K sp (Ag 2 CrO 4 ) ...
A.
AgBr 和 Ag 2 CrO 4
B.
Ag 2 CrO 4 和 AgCl
C.
AgBr 和 AgCl
D.
一齐沉淀
【单选题】某溶液中含有 KCl , KBr 和 K 2 CrO 4 其浓度均为 0.010 mol.dm - 3 ,向该溶液中逐滴加入 0.010 mol.dm - 3 的 AgNO 3 溶液时,最先和最后沉淀的是 ( ) ( 已知 : K sp AgCl =1.56×10 - 10 , K sp AgBr =7.7×10 - 13 , K sp Ag 2 CrO 4 =9.0×10 - 12 )
A.
AgBr和Ag2CrO4
B.
Ag2CrO4 和AgCl
C.
AgBr和AgCl
D.
一齐沉淀
【简答题】配合滴定的过程中,主反应是 M + Y = MY ,副反应有金属离子 M 的 效应; EDTA 滴定剂 Y 的 效应和 效应;还有滴定反应生成物 MY 的 效应。其中不利于主反应进行的副反应有 以及 和 。而某金属离子 M 的条件稳定常数 = 。
相关题目: