皮皮学,免费搜题
登录
搜题
【简答题】
Warm water freezes more quickly than cold water. Sir Francis Bacon said that almost four hundred years ago. But few people believed him until 1970. In that year a Canadian scientist George Kill proved the English professor was right. Dr Kill filled an open oil pail(桶) with cold water. He filled another with warm water. He put both in the same low temperature. The warm water froze first. The lack of covers on the pails is the secret. Some of the warm water changed into vapor. This meant that less of the warm water was left to be frozen. And so the warm water froze faster than the cold water even though it had a greater temperature drop to make. 小题1:Hundreds of years ago, Sir Francis Bacon found _______. A.the temperature of warm water drops faster than that of cold water B.warm water is heavier than cold water C.warm water has the same temperature as cold water D.warm water is not as useful as cold water 小题2:What Sir Francis Bacon said was right, but people didn't believe him until _______. A.late in the 19th century B.early in the 20th century C.three years ago D.late in the 20th century 小题3:Leave a pail with warm water and another pail with cold water in the same low temperature, you’ll find that _______. A.cold water freezes first B.warm water turns into ice before cold water C.warm water and cold water freeze at the same time D.much of cold water is changed into air. 小题4:Why does warm water freeze first in the same freezing weather? A.Because some of the warm water turns to vapor, the amount(数量) becomes less than that of cold water. B.Because warm water is lighter than cold water. C.Because the temperature of warm water is lower than that of cold water. D.Because cold water freezes with more difficulty than warm water.
拍照语音搜题,微信中搜索"皮皮学"使用
参考答案:
参考解析:
知识点:
.
..
皮皮学刷刷变学霸
举一反三
【单选题】男性,42岁,腰推间盘突出症,出现鞍区麻木及二便功能障碍时,通常是因为突出椎间盘压迫了( )
A.
脊髓腰膨大部
B.
脊髓圆锥
C.
马尾神经
D.
骶1神经根
E.
骶2神经根
【简答题】以下关于回风机和排风机说法错误的是?
【多选题】监理工程师对承包单位的现场施工准备所进行的质量控制工作包括( )。
A.
审查承包单位试验室或外委试验室
B.
审查认可承包单位关于建筑材料采购的申报
C.
重点审查总承包单位选定的分包单位的施工组织者、管理者的质量管理水平
D.
现场图纸核对中发现的问题应及时以书面形式报告给设计单位
E.
审核承包单位对原始基准点、基准线和标高的复测结果
【单选题】关于风机,以下说法错误的是____。
A.
风机按作用可分为送风机和抽风机两种
B.
风机按工作原理可分为轴流式和离心式两种
C.
离心式风机适用于高压、小风量或风量变动大的场合
D.
轴流式风机适用于高压、小风量或风量变动大的场合,如:机舱送风机
【多选题】监理工程师对承包单位的现场施工准备所进行的质量控制工作包括( )。
A.
审查承包单位试验室或外委试验室
B.
审查认可承包单位关于建筑材料采购的申报
C.
重点审查总承包单位选定的分包单位施工组织者、管理者的质量管理水平
D.
现场图纸核对中发现的问题应及时以书面形式报告给设计单位
E.
审核承包单位对原始基准点、基准线和标高的复测结果
【判断题】总监理工程师应审查设备制备的原材料、外购配套件、元器件、标准件,以及坯料的质量证明文件及检验报告,并应审查设备制造单位提交的报验资料,符合规定时应予以签认。
A.
正确
B.
错误
【多选题】在下列哪些条件下 ,加权算术平均数等于简单算术平均数( ).
A.
各组次数相等
B.
各组变量值不等
C.
变量数列为组距数列
D.
各组次数都为1
【单选题】以下关于回风机和排风机说法错误的是?
A.
如果回风道阻力太大,导致无法正常回风,应在回风道上安装回风机
B.
如果空调箱内负压严重,导致凝水排不出去,则应在回风道上安装回风机
C.
如果回风道阻力较大,导致无法排风,但回风仍能正常进行,则应考虑在排风道上安装一个小排风机
D.
应根据单风机系统运行过程中遇到的具体问题来决定是应安装回风机还是排风机
【多选题】在下列条件下,加权算术平均数等于简单算术平均数()
A.
各组频数相等
B.
各组变量值不等
C.
变量数列为组距数列
D.
各组频数都为1
E.
各组频数占总次数的比重相等
【单选题】用齿条刀具加工的标准渐开线斜齿圆柱齿轮,其标准模数在( )上。
A.
端面
B.
法面
C.
轴面
D.
主平面
相关题目: