路由器R1的拓扑连接和地址分配如图7-11所示,如果在R1上安装OSPF协议,运行命令:router ospf 200,则配置E0和E1端口的命令分别是______。
A.
network 10.1.1.0 255.255.255.0 area 0 network 192.168.1.0 255.255.255.0 area 1
B.
network 10.1.1.1 255.255.255.0 area 0 network 192.168.1.1 255.255.255.0 area 1
C.
network 10.1.1.255 0.0.0.8 area 0 network 192.168.1.255 0.0.0.8 area 1
D.
network 10.1.1.0 0.0.0.255 area 0.0.0.0 network 192.168.1.0 0.0.0.255 area 1