皮皮学，免费搜题
登录
搜题
【多选题】
乡村振兴的精神所在和有力保障是乡,具体是指()。
A.
文明乡风
B.
良好家风
C.
淳朴民风
D.
和谐村风
拍照语音搜题，微信中搜索"皮皮学"使用
参考答案：
参考解析：
知识点：
.
..
皮皮学刷刷变学霸
举一反三
【判断题】不同的物质由于组成及结构不同,获得的特征光谱也就不同,因而根据样品的光谱就可以研究该样品的组成和结构
A.
正确
B.
错误
查看完整题目与答案
【多选题】The Ethernet 0 interface of a TestKing router was configured with address 10.64.0.1 255.224.0.0 while the Ethernet 1 interface was configured with address 10.96.0.1/11. Which commands could be used to...
A.
Router(config)# router rip Router(config-router)# network 10.0.0.0 255.224.0.0
B.
Router(config)# router rip Router(config-router)# network 10.0.0.0
C.
Router(config)# router rip Router(config-router)# network 10.64.0.0 Router(config-router)# network 10.96.0.0
D.
Router(config)# router rip Router(config-router)# network 10.64.0.1 255.224.0.0 Router(config-router)# network 10.96.0.1 255.224.0.0
查看完整题目与答案
【单选题】执行下列程序段后，m的值为【 】int a[2][3]={{1,2,3},{4,5,6}};int m,*p=&a[0][0]; m=(*p)*(*(p+2))*(*(p+4));
A.
15
B.
18
C.
10
D.
12
查看完整题目与答案
【判断题】不同物质由于组成和结构不同,获得的特征光谱也就不同,因而根据样品的光谱就可以研究该样品的组成和结构。
A.
正确
B.
错误
查看完整题目与答案
【单选题】You are an administrator and you've just configured OSPF on a router with both physical and logical interfaces. Which of the following factors determine the router ID?
A.
The lowest IP address of any interface.
B.
The highest IP address of any interface.
C.
The highest IP address of any logical interface.
D.
The middle IP address of any logical interface.
E.
The lowest IP address of any physical interface.
F.
The highest IP address of any physical interface.
G.
The lowest IP address of any logical interface.
查看完整题目与答案
【判断题】不同的物质由于组成和结构不同,获得的特征光谱也就不同,因而根据样品的光谱就可以研究该样品的组成和结构。
A.
正确
B.
错误
查看完整题目与答案
【单选题】Refer to the exhibit. When running OSPF, What would cause router A not to form an adjacency with router B?（）
A.
The loopback addresses are on different subnets
B.
The value of the dead timers on the router are different
C.
Route summarization is enabled on both routers
D.
The process indentifier on router A is different than the process identifier on router B
查看完整题目与答案
【单选题】执行下列程序段后，m的值为【 】int a[2][3]={{1,2,3},{4,5,6}};int m,*p=&a[0][0]; m=(*p)*(*(p+2))*(*(p+4));
A.
15
B.
18
C.
12
D.
10
查看完整题目与答案
【简答题】执行下列程序段后, m 的值为 _______ 。 int a[2][3]={{1,2,3},{4,5,6}}; int m,*p; p=&a[0][0]; m=(*p)*(*(p+2))*(*(p+4));
查看完整题目与答案
【判断题】Generation Y employees can be picky about where they work because they like travelingand experiencing new things.
A.
正确
B.
错误
查看完整题目与答案
相关题目：
【判断题】不同的物质由于组成及结构不同,获得的特征光谱也就不同,因而根据样品的光谱就可以研究该样品的组成和结构
A.
正确
B.
错误
查看完整题目与答案
【多选题】The Ethernet 0 interface of a TestKing router was configured with address 10.64.0.1 255.224.0.0 while the Ethernet 1 interface was configured with address 10.96.0.1/11. Which commands could be used to...
A.
Router(config)# router rip Router(config-router)# network 10.0.0.0 255.224.0.0
B.
Router(config)# router rip Router(config-router)# network 10.0.0.0
C.
Router(config)# router rip Router(config-router)# network 10.64.0.0 Router(config-router)# network 10.96.0.0
D.
Router(config)# router rip Router(config-router)# network 10.64.0.1 255.224.0.0 Router(config-router)# network 10.96.0.1 255.224.0.0
查看完整题目与答案
【单选题】执行下列程序段后，m的值为【 】int a[2][3]={{1,2,3},{4,5,6}};int m,*p=&a[0][0]; m=(*p)*(*(p+2))*(*(p+4));
A.
15
B.
18
C.
10
D.
12
查看完整题目与答案
【判断题】不同物质由于组成和结构不同,获得的特征光谱也就不同,因而根据样品的光谱就可以研究该样品的组成和结构。
A.
正确
B.
错误
查看完整题目与答案
【单选题】You are an administrator and you've just configured OSPF on a router with both physical and logical interfaces. Which of the following factors determine the router ID?
A.
The lowest IP address of any interface.
B.
The highest IP address of any interface.
C.
The highest IP address of any logical interface.
D.
The middle IP address of any logical interface.
E.
The lowest IP address of any physical interface.
F.
The highest IP address of any physical interface.
G.
The lowest IP address of any logical interface.
查看完整题目与答案
【判断题】不同的物质由于组成和结构不同,获得的特征光谱也就不同,因而根据样品的光谱就可以研究该样品的组成和结构。
A.
正确
B.
错误
查看完整题目与答案
【单选题】Refer to the exhibit. When running OSPF, What would cause router A not to form an adjacency with router B?（）
A.
The loopback addresses are on different subnets
B.
The value of the dead timers on the router are different
C.
Route summarization is enabled on both routers
D.
The process indentifier on router A is different than the process identifier on router B
查看完整题目与答案
【单选题】执行下列程序段后，m的值为【 】int a[2][3]={{1,2,3},{4,5,6}};int m,*p=&a[0][0]; m=(*p)*(*(p+2))*(*(p+4));
A.
15
B.
18
C.
12
D.
10
查看完整题目与答案
【简答题】执行下列程序段后, m 的值为 _______ 。 int a[2][3]={{1,2,3},{4,5,6}}; int m,*p; p=&a[0][0]; m=(*p)*(*(p+2))*(*(p+4));
查看完整题目与答案
【判断题】Generation Y employees can be picky about where they work because they like travelingand experiencing new things.
A.
正确
B.
错误
查看完整题目与答案