皮皮学,免费搜题
登录
搜题
【简答题】
阅读理解。 Air pollution comes from factories, power stations and cars. Chemicals in the smoke from power stations cause a lot of damage (损害;毁坏). They can travel hundreds of miles in the wind before falling to the ground in the rain. And this'chemical rain' gradually (逐渐地) destroys trees in the forests and kills fish in the lakes. In Germany, over 50% of the country's trees had been damaged by the year 1986. Time and time again there are serious accidents that pollute the air. In 1986 there was a serious accident at a nuclear power station in Russia. A cloud of radiation flew across the whole Europe. It is said that 125,000 people died in Russia as a result of illness caused by this accident. In 1984 there was a serious accident at a factory in India and a cloud of dangerous gas covered the town of Bhopal. Over 2,500 people were killed that night, and hundreds of thousands of people were injured (受伤 的). Many of the injured lost their sight. 1. Air pollution comes from _____. A. factories B. power stations C. cars D. all of the above 2. According to the passage, which sentence is right? A. Chemicals in the smoke from power stations can't travel far in the wind. B. 'Chemical rain' is good for the trees. C. Chemicals in the smoke from power stations are very safe. D. 'Chemical rain' is bad for our environment. 3. In Germany, how many trees had been damaged by the year 1986? A. A quarter. B. A half. C. Three quarters. D. A third. 4. What was the result of the accident that happened in Russia in 1986? A. Over 2,500 people were killed. B. Many people couldn't walk. C. Many people lost their sight. D. Compared with (同……比较) the accident in India, more people died. 5. From the sentence'Many of the injured lost their sight.' we can know _____. A. the gas covered the town of Bhopal at that time was poisonous (有毒的) B. gradually the injured could see everything C. many of the injured couldn't see anything any more D. Both A and C
拍照语音搜题,微信中搜索"皮皮学"使用
参考答案:
参考解析:
知识点:
.
..
皮皮学刷刷变学霸
举一反三
【简答题】路由器连接帧中继网络的接口是( ),连接双绞线以太网的接口是( )。 A.AUI接口B.RJ-45接口C.Console接口D.Serial接口A.AUI接口B.RJ-45接口C.Console接口D.Serial接口
【简答题】(1100100)B=(______)D
【简答题】设一齿轮的齿数为 z,其分度圆的直径为d,该圆上的齿距为p,齿距p乘以齿数z就等于分度圆的周长(π*d可得),即p*z= π*d,则d=(p/ π)*z,设m= p/ π,则d=m*z,这样分度圆直径为齿数的m倍,m为无理数不方便使用,所以人为地把m规定为一些简单的有理数,该比值称为( )。模数的单位是( ),它是决定齿轮尺寸的一个基本参数。齿数相同的齿轮,模数越大,尺寸也越(...
【单选题】模数m是齿轮几何尺寸计算中的重要基本参数。 m 越大,则p 越( ),轮齿尺寸就越( ),轮齿的抗弯曲能力也就越( ),承载能力就越( )。
A.
小、小、高、大
B.
大、大、低、大
C.
大、小、高、小
D.
大、大、高、大
【单选题】一个西瓜中有100粒种子,则此西瓜在形成时需要的子房、胚珠、精子的数目分别是(  )
A.
1  100  100
B.
100  100  100
C.
1  100  200
D.
100  100  200
【简答题】_____是齿轮几何尺寸计算中的重要基本参数。m越大,则p越大,齿轮就越大,齿轮的抗弯曲能力也就越高,故____是齿轮抗弯曲能力的重要标志。
【单选题】将二进制数1100100B转换成十六进制数是( )。
A.
63H
B.
64H
C.
ADH
D.
100H
【单选题】模数m是齿轮几何尺寸计算中的重要基本参数。下列表述中,() 是正确的:m 越大,则p 越( ),轮齿尺寸就越( ),轮齿的抗弯曲能力也就越( ),承载能力就越( )。
A.
小、小、高、大
B.
大、大、低、大
C.
大、小、高、小
D.
大、大、高、大
【单选题】eNodeB与MME/S-GW之间的接口是()。
A.
Iu接口
B.
X2接口
C.
S1接口
D.
A接口
【简答题】补码表示的机器数为1100100B(字长7bit,单符号位),此数的真值为( )。
相关题目: