皮皮学,免费搜题
登录
搜题
【单选题】
•Read the magazine article below a new tape storage system. •For questions 23-28,choeso the correct answer. •Mark one letter (A, B or C) on your Answer Sheet. TapeStore: A NEW TAPE SIORAGE SYSTEM TapeStore is a new kind of tape storage system which can store up to 6,000 computer tapes. No other tape storage system can hold as many computer tapes as TapeStore. The tapes look exactly like video cassettes. Many hundreds of data files can be stored on each tape, up to a maximum of 500 million bytes of data. If you stored the same amount of information on paper, you would need nearly 4.5 billion printed pages. The machine is a tall black box with a mechanical arm. The machine is 2.5 metres high and 3.0 metres wide. This is how it works. Each tape has a code printed on it. YOU feed the code number into TapaStore, which then looks for the code. As soon as TapaStore locates the cede, the arm reaches in and pulls out the tape. The system is very fast. It takes the mechanical arm about 10 seconds to find the tape it is looking for. The machine then searches the tape to extract the required file, and this take less than a minute. A human technician would have to locate and remove the tape by hand and could take at least an hour to find the right file on the tape. Some of the world's biggest companies, including banks, insurance companies, airlines, telephone companies, utilities and computer centres, have bought the system. They like it particularly because the system guarantees the security of their data. TapeStore was originally developed in Canada and is now being marketed world-wide. In Europe alone, 750 have already been installed at a cost of 480,000 dollars each. TapeStore is better than similar storage systems because
A.
it can also take video cassettes.
B.
it is much smaller.
C.
it holds more information.
拍照语音搜题,微信中搜索"皮皮学"使用
参考答案:
参考解析:
知识点:
.
..
皮皮学刷刷变学霸
举一反三
【多选题】旅行社间接销售渠道的优点( )。
A.
影响面广
B.
针对性强
C.
销售量大
D.
附加值高
E.
销售成本低
【简答题】假设某公司预计全年需耗用甲零件5000件。该零件的单位采购成本为20元,单位年储存成本为单位采购成本的10%,平均每次订货成本为50元。假设该零件不存在缺货的情况。按照基本经济订货量模型计算出的年度最佳订购次数为________。
【单选题】在固定资产系统的账套参数中,启用月份的最主要作用是( )。
A.
确定开始计提折旧的月份
B.
确定开始处理增减处理的月份
C.
确定开始对账的月份
D.
确定开始变动处理的月份
【简答题】假设某公司预计全年需耗用甲零件5000件。该零件的单位采购成本为20元,单位年储存成本为单位采购成本的10%,平均每次订货成本为50元。假设该零件不存在缺货的情况。按照基本经济订货量模型计算出的年总成本极小值为________。
【多选题】固定资产管理系统的初始化包括建立固定资产子账套,需要在固定资产管理系统中完成的初始化内容一般包括______。
A.
固定资产管理系统的启用月份
B.
确定本账套是否计提折旧以及选择默认的折旧方法
C.
固定资产的编码方式
D.
与账务子系统接口的设置
【简答题】假设某公司预计全年需耗用甲零件5000件。该零件的单位采购成本为20元,单位年储存成本为单位采购成本的10%,平均每次订货成本为50元。假设该零件不存在缺货的情况。按照基本经济订货量模型计算出甲零件的经济订货量为________。
【简答题】假设某公司预计全年需耗用甲零件5000件。该零件的单位采购成本为20元,单位年储存成本为单位采购成本的10%,平均每次订货成本为50元。假设该零件不存在缺货的情况。 计算甲零件的经济订货量;
【简答题】假设某公司预计全年需耗用甲零件5000件。该零件的单位采购成本为20元,单位年储存成本为单位采购成本的10%,平均每次订货成本为50元。假设该零件不存在缺货的情况。 计算经济订货量下的相关总成本和全部总成本;
【简答题】假设某公司预计全年需耗用甲零件5000件。该零件的单位采购成本为20元,单位年储存成本为单位采购成本的10%,平均每次订货成本为50元。假设该零件不存在缺货的情况。 分别介绍定期订货法和定量订货法的工作原理,本题采用的是何订货方法?
【单选题】在固定资产系统的账套参数中,启用月份的最主要作用是( )
A.
确定开始计提折旧的月份
B.
确定开始处理增减处理的月份
C.
确定开始变动处理的月份
D.
确定开始对账的月份
相关题目: